Guide
Shower, sea, charging: when your ring and watch pass the baton
You wear several devices but you have one body. Here are the real situations where FitMesh decides who was measuring, hour by hour, and shows you a single day.
Lyhyesti
- Several devices, a single day: your wearables pass the baton instead of competing.
- Shower, sea, night charging, forgotten watch: the ring covers the moments when the watch is off.
- The same steps are never counted twice.
- It works the same on Android and iPhone, with nothing to set up.
Your devices pass the baton like in a relay, and you see a single day. You wear a ring, a watch, sometimes a chest strap. But you have one body, and the steps you take are the same. The real work is not collecting the numbers, it is deciding who was measuring at each moment. Here are the situations where this changes your day, taken from real use.
The situations, taken from real use
- In the shower and at the sea. Take off the watch, keep the ring on your finger. The ring is water-resistant and keeps counting steps and heart rate while you swim or wash. Those hours do not disappear from the chart: the ring fills them in.
- At night, with the watch charging. Many people charge the watch before sleep. If you wear the ring, it records your sleep, stages included. In the morning you find the full night, without the gap of the charging hours.
- Working out, with a chest strap. During sport a chest strap gives a more reliable heart rate than the wrist. FitMesh uses it for that session and leaves the rest of the day to the device you always wear. No strange averages, no random swaps.
- When you forget the watch at home. It happens. The day does not stay empty: the ring keeps the count, and when you put the watch back on the two stitch together into one picture.
- Travelling, with a dead phone. The ring stores the data and syncs it when you reconnect. You do not lose the hours when the phone was off.
- Ring out of battery? The watch steps in. It works both ways: if the ring runs out, the watch covers those hours. Neither device is indispensable.
- With two phones, Android and iPhone. Same account, same view. The data flows together, with the source shown where it matters.
Adding up is the fastest way to get a dashboard that lies
Three devices measuring the same body do not make triple the steps. We do the opposite of adding up: we keep one number, the right one, and we tell you where it comes from.
The day that taught us the most
A real day: watch and ring together from the morning, then an hour at the sea with the ring only, then both again. Adding up would have inflated the total. Ignoring the ring would have erased the hour at the sea. The right answer is not «which device wins», it is «who was measuring, hour by hour». That hour at the sea enters the count once, in the right place.
Usein kysytyt kysymykset
Do I need to set up anything for the fusion?+
No. You connect your devices and FitMesh decides on its own, hour by hour, which one was measuring. There is nothing to set up.
If I wear two devices at once, are steps counted twice?+
No. For each hour a single device is chosen, so the same activity is never added up twice.
Does it work the same on Android and iPhone?+
Yes. With the same account you see the same fused day on both, with no different setup.
Terveysvaroitus
Tämän artikkelin tiedot ovat vain tiedoksi eivätkä korvaa lääkärin, farmaseutin tai muun terveydenhuollon ammattilaisen neuvoja. FitMesh Sync on kunto- ja hyvinvointisovellus, ei lääkinnällinen laite, eikä se diagnosoi tai hoida mitään sairauksia. Oireiden, kliinisten kysymysten tai hoitopäätösten osalta ota aina yhteyttä omaan lääkäriisi.
Written by
Matteo Pizzi
Founder & Solo Dev, FitMesh Sync · Fosforonero
Italian software developer. I built FitMesh Sync to fill the gap between my smartwatch and a real personal dashboard. Privacy-first, indie, EU servers.
More about the projectJatka lukemista
What's New
Now you know which device each metric comes from
Watch, ring and other devices in one screen, with a clear label of which one measured what. One view, no double counting.
Guide
Multiple smartwatches, no duplicate data: the multi-wearable deduplication guide
Every wearable thinks it's the only source of truth, and it's right from its own perspective. The problem starts when five sources of truth all write to Health Connect and none of them knows the others exist.
What's New
Multi device dashboard: all your wearables in one view, no duplicates
With today's update, FitMesh Sync introduces the global dashboard: a single screen that aggregates data from watches, ring and other sources, eliminating duplicates and always showing the best value for each metric.